Current at

The first large-scale installation of Paks Unit 5 completed

Published

The first large-scale installation in the history of Paks II, the zone melt trap of Unit 5, will soon be launched. The 730-tonne piece of equipment is one of the so-called passive safety devices of the Paks unit, designed to prevent the almost impossible from having adverse environmental consequences should it happen.

The VVER-1200 unit type being built in Paks is equipped with several passive safety systems. A common feature of these systems is that they do not require human intervention or an external energy source to operate; their functions are performed by simple physical processes. In the event of a failure of the active safety systems, they take over to ensure the cooling of the active zone and the integrity of the containment. These include the passive accident cooling system, steam generators, the passive heat removal system of the containment and the hydrogen removal system of the containment, as well as the equipment for localising the zone melt, better known as the zone melt trap. The latter is designed for very low probability – almost impossible – severe accident situations.

This is a special tank located under the reactor vessel, capable of containing the zone melt in the event of damage. It helps to reduce hydrogen evolution and the release of radioactive material into the environment. The vessel contains a fusion charge containing alumina and iron oxide which, when mixed with the zone melt, reduces the specific heat of the melt. Gadolinium is also added to the melt charge, which prevents nuclear chain reactions in the melt due to its neutron absorbing properties. If necessary, the steel tank of the melt trap can be cooled from the outside with borated water.

The equipment is a special safety enhancement solution for the upgraded third generation VVER-1200 type units. The innovative device, developed by Russian engineers, will be located under the reactor vessel and will be able to contain the zone melt in case of damage.

 

 

An important milestone in the history of the Paks II project is the completion of the Unit 5 zone melt trap, the largest piece of equipment in the nuclear power plant, weighing more than 730 tonnes and over 15 metres high - the size of a four-storey house.

The approval and production of a special tank for the localisation of zone melt is the result of years of work. The process has generated almost 35,000 pages of documentation. The production licensing documentation prepared for the National Nuclear Energy Office amounted to 15,000 pages. This was checked by Paks II engineers in several rounds with the involvement of external experts before being made available to the authority. This was a huge job, identifying the requirements of the contract and the Nuclear Safety Regulations. During standard verification, applicable standards were compared with national and international requirements. In addition, the Russian nuclear industry standards have recently been revised and modernised and the manufacturing and prefabrication of the zone melt trap had to work within the new system, which incorporates the latest modern methods and EU requirements.

 

 

In addition to the documentation review, the manufacturing company has undergone a nuclear qualification audit, like all other subcontractors. The manufacturing capability audit required proof that it had the necessary tools, equipment, technologies, personnel, qualifications and accreditations. The production start-up audit was held on 9 August 2022 at the plant in Russia, where the Paks II experts again verified the manufacturing capabilities. Production was monitored continuously over the following months and, at the end of the process, the equipment was taken over on 29 March 2024, after the experts had verified that it met all the requirements. The melting valves were also checked during the previous inspections. The valves must melt at a certain temperature. The trap has eight valves and two extra valves have been manufactured to carry out the melting test.

The high-tech device, weighing more than 730 tonnes, will arrive at the Paks site by water following a successful final handover of the manufacturing plant, allowing it to be installed at an early stage of the installation.

When the Paks II staff arrived, the melting trap was in an assembled state and they were allowed to enter and inspect it inside and out. The monstrosity, consisting of seven main components, was then dismantled, painted and conserved before being transported to Hungary. As with the design, licensing and manufacturing, the transport is a special task requiring great care and a lot of coordination. The zonal trap is transported disassembled from the factory to the port, where it is loaded onto a ship with special attention paid to weight distribution, as the largest component weighs 135 tonnes. After launching, the zonal melt trap will arrive in Paks in a few weeks, where it is expected to be permanently installed in the first half of next year.

This is the first major piece of equipment to be completed in the history of the Paks II project, and will soon be followed by other long-life equipment, including the reactor vessel at the heart of the plant, the production process of which is similarly supervised by Paks experts.

Source : Link

Popular