Bound track

These are the projects SWIETELSKY Vasúttechnika Kft. worked on in 2023

Published

Nearly six years of major investment have come to a close this year, with the renewal of the M3 metro line completed. Work was also underway to upgrade the siding network at the Audi plant in Győr, and the company's engineering business had a busy year.

One of the capital's busiest railway lines renewed

The company began work on renovating the M3 metro line back in 2017. The nearly six-year project was completed this year. The company's tasks on the M3 metro line tasks included track construction and renovation, tunnel work, safety equipment renovation, and the modernisation of railway telecommunications and central dispatching systems. The track and the third rail were renovated over a length of almost 40 km.

Photo by Mihály Erdei/magyarepitok.hu

Throughout the investment:

  • 44 groups were built on the main line and 18 groups in the depot for the installation of siding.
  • about 200 km of cable support structures were built in the M3 metro line tunnels. A total of 39,231 metres of traction power cables were laid in the tunnel and on the surface,
  • a total of 4684 luminaires and 951 EXIT lamps were installed in the tunnel along the entire line. For the telecommunications and low voltage works: 20 stations, 40 dispatching workstations; 137 variable displays; 1148 cameras; 2254 loudspeakers; 330 emergency call points; 686 door opening detectors; 5099 fire and heat detectors.
  • 25 new electro-hydraulic alternating drives were completed and 10 were refurbished.

An important part of the M3 metro reconstruction was the renovation of the Dispatch Centre on Szabó Ervin Square renovation. As part of the work carried out, a ventilation machine room was created in the basement, while during the reconstruction and renovation work on the first, second, fourth and fifth floors, a training room, a new battery room, a telecommunications equipment room and the KFM Central Traffic Control Room on the fifth floor, complete with a new kitchenette.

 

Photo by Mihály Nagy/magyarepitok.hu

During the renovation works, 275 m2 of suspended floors and ceilings were replaced and the metal ceilings were renovated. The mechanical installations and electrical systems in all the renovated rooms were replaced according to the client's requirements.

Also related to the M3 related work was that, thanks to the experts at SWIETELSKY Vasúttechnika Kft., a turning disc equivalent to the performance of a new piece of equipment can be operated at the Kőér Street vehicle depot. During the comprehensive modernisation, the reinforced concrete shaft, the circular track, the surface finish, the electrical and mechanical systems were renewed, and parts that had been significantly damaged and worn during use were replaced.

 

Photo by Mihály Erdei/magyarepitok.hu

 

Modernisation of the siding network at the Audi factory in Győr

In the implementation of Swietelsky Vasúttechnika Kft., rebuilt a level crossing at the Audi factory in Győr and modernised several sections of the industrial railway network. In the summer of 2023, a level crossing was rebuilt and the connecting track sections were regulated, in addition to which a further 240 metres of track were renovated on the factory premises.

Photo: SWIETELSKY Vasúttechnika Kft. 

 

Development of the Csepel Free Port nears completion

The company also worked on the complex development of the infrastructure network of the Csepel Free Port: here, more than 3 kilometres of track network was rebuilt, and waterfront developments, railway construction works and related public utility construction and replacement tasks were carried out.

 

Busy year in engineering

The company has a fleet of around 150 machines. The engineering department was involved in several projects in 2023. For example, the KIAG machine was deployed on the tracks of the BKV rolling stock depot. The large machine was used for regulation works on tracks and siding previously renovated for the M3 metro.

On the Budapest-Cegléd railway section, the Austrian company Plasser & Theurer developed the RM 80 UHR ballast cleaning machine to clean the ballast over a distance of more than two kilometres.

Photo by Mihály Nagy/magyarepitok.hu

 

In the autumn, the Vasúttechnika heavy equipment of the KIROW 1220 crane and the 08-475 UNIMAT 4S KIAG control machine also took part in the renovation of the Szombathely railway station. In October, siding replacements and track reconstruction were performed on the left and right tracks of Line 20. The track control was performed with the frequently used 08-475 UNIMAT 4S KIAG control machine. In November, during the final phase of the reconstruction, the Vasúttechnika worked on the tracks of the Kőszeg and Sopron lines: after the dismantling of the tracks and the rebuilding of the substructure, the ready-mounted siding was laid back using a KIROW 1220 crane. In total, 9 sliders were built on the two tracks by Vasúttechnika.

 

Photo by Mihály Erdei/magyarepitok.hu

 

In addition to their work in Hungary, the Vasúttechnika machine operator colleagues have worked in many countries in Europe at various sites of the parent company Swietelsky AG. Railway lines in Sweden, Denmark, the Netherlands, Luxembourg, Germany, the Czech Republic, Austria, Slovakia, Romania and Croatia have been renewed thanks to the knowledge and work of the Hungarian company's specialists.

 

 

Thanks to the skills they have acquired in Hungary, the Vasúttechnika colleagues have earned a very high level of recognition and appreciation in all European workplaces, and are welcomed wherever they go, and are always welcome back after each job. A special mention must be made of the entire team of 80 SMD track-laying machines, who this year have laid more than 180 km of track in 8 countries with the giant machine.

 

Source : Link

Popular