What is being built?

The drilling of the thermal well that will supply geothermal energy to the new district of Zugló is completed - VIDEO

Published

The well was drilled with a 63-tonne rig, in a fenced-off area within the construction site adjacent to Bosnian Square, under high security measures.

The Zugló City Centre investment is outstanding not only in terms of construction efficiency but also in terms of energy management. As we wrote earlier: the office buildings and residential buildings being constructed in the immediate vicinity of Bosnyák Square will be heated using geothermal energy with a modern heat pump system. The contractor for the multifunctional district centre is BAYER Construct Zrt.. 

Work on the terminal started in early June. The drilling was carried out under special safety measures and in compliance with the official regulations (Natural Gas Mining Safety Code) by a team with many years of experience abroad. The team of about ten engineers and technicians, headed by the supervisor, worked continuously, 0-24 hours, as the special technology of the drilling required.

Special footage of the drilling process was taken by our crew.

 

The giant machine has retained its 32-metre rig

The drilling was carried out by the Schoeller Bleckmann 160, which has been used on numerous missions around the world. The rig weighs 63 tonnes and has a pulling capacity of 160 tonnes. When assembled, the rig is 21.5 metres long and 32 metres high.

The drilling rig was placed in a separate demarcated area within the Zugló City Centre construction site, with reinforced and raised noise barriers around it.  

The gigantic vehicle is self-propelled and travels on its own wheels on a road with the rig folded up. It took about four days to assemble by the technicians, after which it began operations in early June.

Although the rig can stop on its own, it has been secured with storm cables to make it safer.

A well is made using a process similar to that used for natural gas or oil wells

The drilling technology was presented by Gábor Fekete, Bayer Construct Zrt.'s civil engineering business unit manager.

 "The technology used to drill the well is the same as that used to extract the hydrocarbons. It is true that thermal water requires a slightly thicker bore, because it has to produce a higher yield than oil or gas - which makes it slightly more difficult to drill thermal wells, but the same physical laws and technologies apply."

Gábor Fekete said that no seismic studies will be carried out in an urban environment, because the high "background noise" would make it impossible. The drilling will rely on the large amount of geological data available, which will allow a relatively accurate determination of the soil structure. There are many drilled wells in the capital. For example, the working thermal well of the Paskál Spa is located near the Zugló City Centre.

reach the right layer at 30 metres per hour

The structure consists of several main units. These are: the drilling rig (32 metres high), the drill stem, the drive unit, the slurry pump and the tank.

An important part of the machine is the anti-breakout device. The function of this is that when the drill bit reaches the layers where there may be some kind of stored medium, they are fitted and the drill bit goes down through them and automatically closes the system, preventing any breakout. Measurements of the drilling process are taken and immediately analysed and evaluated.

The drilling speed depends on the resistance and strength of the soil, but it can be said that the drill bit operates at an average speed of 30 metres per hour. The geological data indicate that drilling is necessary down to a depth of 1,300 to 1,500 metres, which is the layer from which the thermal water can be extracted.

At this depth, a safety sealing system is installed, which is cemented to the surface and hermetically sealed, so that the drilled drinking water layer is not damaged by the process. This technology complies with official regulations.

The most interesting and spectacular part of the structure is the rotary motor drive, which injects a hollow drill stem about 30-40 centimetres in diameter into the ground to a certain depth, inside which mud flows downwards. Where the drill bit works and loosens the rock, the mud flows out. Liner pipes are then fed down into the hole, this is where the material comes back in, the mud in a continuous cycle brings the drill cuttings to the surface, which are cleaned and reused.

The extracted material is continuously subjected to geophysical and soil physics tests, measuring gas content and other components, from which conclusions are drawn about the layer at which the drill bit is drilling. Accordingly, the further technique, speed and density of the sludge being drilled are determined.

Favourable conditions helped the drilling

We learned from Gábor Fekete, head of the civil engineering division: the reservoir containing thermal water was found in ten days instead of the planned two weeks and at a depth of 1150 metres instead of the previously expected 1300 metres. All parameters are a little better than they had calculated: the water in its own environment is 80 degrees Celsius.

"By the end of the process, we managed to build the entire pipe system, installed the filter and the well started extracting water on 15 June 2023" - concluded Gábor Fekete.  

Further information about the project can be found here: Zugló Town Centre.

Source : Link

Popular