What is being built?
The rebirth of the Living Major on the south shore of Lake Balaton
Szántód-Szántódpuszta, which lies on the southern shore of Lake Balaton, opposite the Tihany peninsula, is an outstanding example of Hungarian monuments that has remained uniquely intact. It is mentioned in the founding charter of the Benedictine Abbey of Tihany, but its true heyday came after the Turkish occupation, when Vilibald Grassó, Abbot of Tihany, began the reconstruction of the burnt down and completely looted monastery.
During the renovation of the 20-hectare estate between 2021 and 2023, 13 buildings and structures were renovated by Nemzeti Örökségvédelmi Fejlesztési Nonprofit Kft. renovated 13 buildings and structures on the 20-hectare estate between 2021 and 2023 in order to showcase the farming and lifestyle of earlier times at the original site.
The general construction tasks for the project were carried out by Dunántúli Magasépítő Kft. and Possibuild Kft. consortium.
Structural reinforcement with MAPEI products
During the renovation of the L-shaped stable building (building no. 15 on the map above) with a gross floor area of almost 800 m² located on the estate, experts used Mapei Kft. FRCM structural reinforcement system was used by the specialists of Dunántúli Magasépítő Kft. who carried out the construction, according to information provided to our newspaper by the construction materials manufacturer.
Reinforcement of the vault with Mapei FRCM
The stables originally consisted of a series of Czech glass arches supported on 50-66 cm thick external masonry, with reinforcing arches at the joints of each of the windows. Following the dismantling of the roof structure of the barn, the experts observed various types of damage to the walls, arches and vaults, looseness and element deficiencies.
For the safe execution of further works and to prevent further structural damage, the structural engineer recommended the structural reinforcement of the damaged vault fields using the FRCM system of Mapei.
FRCM fibre-reinforced cementitious (Planitop HDM Maxi) or cementless mortar (Planitop HDM Restauro) can be applied in 1-1.5 cm increments and used in conjunction with different types of fibre-reinforced meshes (these can be glass, basalt or carbon fibre meshes). Such systems allow the weight and stiffness of the reinforcement to be effectively reduced while significantly increasing mechanical strength.
As can be seen from the Mapei Kft. information,
- the work has been carried out by first cleaning the vault surface and joints to a depth of at least 3-4 cm and repairing major surface defects Mapewall Muratura Fine with adhesive mortar.
- The cleaned and levelled surface was then coated with a first layer of about 5-6 mm of MAPEI Planitop HDM Restauro repair foam and on top of this fresh layer of mortar, the Mapegrid B250 glass-fibre reinforcement mesh. The pieces of netting were placed side by side with an overlap of about 15 cm.
- Finally, a final layer of Planitop HDM Restauro repair mortar, another 5-6 mm thick, was then applied to the mesh, so that it completely covered the nets while the first layer was still fresh.
Reinforcement of the load-bearing masonry with Mapewrap G Fiocco glass fibre braid
The vaults at the shop shoulder were not connected to the load-bearing ground floor walls, so the reinforcing mortar was also required to be tied into the masonry.
For this, Mapewrap G Fiocco Ø10 fibreglass cord had to be drilled into the load-bearing masonry and glued in place. The anchors were spaced 30 cm apart and glued 20 cm deep into the load-bearing masonry.
For this task, first impregnate the part of the fibreglass cord that will be inserted into the hole with Mapewrap 21 epoxy resin, and the impregnated surface is sprinkled with QUARZO 1.2 dry sand. Once the resin has hardened, inject Mapefix VE SF chemical anchors are injected into the holes and the rigid part of the cords is inserted.
The ends of the cords are spread out on the previously applied reinforcement and secured using Mapewrap 11 epoxy mortar.
This operation guarantees the elimination of possible "detachment" phenomena and increases the static efficiency of the reinforcement applied.
Thanks to the completed renovations, the approximately 20-hectare Szántódpuszta Manor offers a wealth of recreational opportunities for those interested in cultural attractions, and visitors to Szántódpuszta can experience everyday life at „THE LIVING MANOR”.
A spectacular video of the renovation of the Majorság was also filmed on site and can be viewed at the link below:
Source : Link
-
Bound track 2026. 10. 07.
Aurora beneath the Apennines – Another tunnel is being built on the Naples–Bari railway line
-
Road building 2026. 10. 13.
A consortium comprising STRABAG and Duna Aszfalt has been awarded the contract to build the North Macedonian motorway
-
What is being built? 2026. 10. 09.
One of Budapest’s oldest nurseries is being renovated whilst preserving its timber roof structure
-
Current at 2026. 10. 10.
„The focus will not be on Lean’s equipment, but on how we operate” – the ‘Lean in the Construction Industry’ conference in November
