What is being built?

A single witness - the last mill of Veszprém was saved

Published

Cemix products were chosen for the renovation of the Fenyves mill, which uses the energy of the Séd water.

The swift Séd stream, winding around Veszprém's Várdomb, once powered dozens of mills. Not only the development of technology, but also nationalisation and the destruction of once vital industrial buildings have left only one of Veszprém's fifteen mills in operation. The Fenyves mill was also found in ruins by its new owner, mill restorer Péter Tamás. However, its rescue was not an issue, as the mill structure has survived almost intact despite the difficult decades.

 

 

New life, old stones

The building was known locally as the Buda-Pozsgay mill, the construction of which was decided by the town assembly in 1840. On 1 January 1846, the town's grain mill began operating, but although it was designed as a top-tap mill, it was converted into a bottom-tap mill around 1848. Owned by the town, the three-wheel mill was sold in 1884 to Miklós Pozsgay, a miller. It was thanks to him that the mill was renovated in 1892, as commemorated by the inscription 'RA 1892 NOV. 19' on the slab beam in the workroom opposite the entrance. According to the 1894 technical specifications, the mill's water wheel was replaced by a turbine. However, the Girard turbine designed and installed by the Fischer company of Vienna did not work, so in 1903 the machine factory of E. Pohl and Sons of Szombathely installed a Francis turbine, which lasted until the mill was closed in 1951.

"We bought the mill in 2019, and after about a year of cleaning, demolition and landscaping, we could start the renovation" - said mill restorer Péter Tamás, the current owner.

Thanks in part to the European Capital of Culture programme, a mill history exhibition opened in 2021; the renovation of the mill machinery and the courtyard furnace were completed by summer 2022; and the two large water wheels and the water playground were finished by 2023. This year the back miller's room was renewed with the support of Cemix. The next major work is scheduled for later this year: the renovation of the attic and making it accessible to visitors, followed by the renovation of the miller's house.

 

 

It took both excellent ingredients and decades of expertise

While Peter Tamás - perhaps the only mill restorer in Europe - is in charge of the mechanical parts, the preservation of the walls and the restoration of the building is the responsibility of Cemix. As we learnt from Péter Gyarmati, project manager of Cemix:

"The primary goal was to use materials that were true to the period, which is why clay plaster was chosen,"

which will be available in the Cemix product range from 2023 onwards in the same quality and immediately throughout the country. The clay plaster 100 in % is natural, free of binders (cement, lime) and pollutants, recyclable and provides good vapour retention.

 

 

"We decided to use dry plaster for the outdoor, exposed surfaces, because although the structure is subjected to intensive loads, it is not insulated against moisture" - the project manager explained.

Cemix lime plaster is unique in the Hungarian market, as it contains pure lime hydrate and pozzolana, making it not only an authentic building material, but also low carbon and durable. Plastering the mixed stone masonry of the mill was a major challenge: there were doubts as to whether the clay plaster would adhere well to the very poorly absorbent surface, but in the end the system worked well and will be well protected by the lime plaster, which can also be used outdoors.

So, during the renovation of the mill building

  • about three tonnes of rough machine-made clay plaster, clay bonding bridge and clay trowel plaster for the interior,
  • approximately one tonne of Eurosan EP hand-drying plaster and Eurosan VS plaster for the fence restoration,
  • and the near future plans include the application of lime plaster, lime gesso and lime smoothing plaster for the reconstruction of the building's façade.

 

 

Many years of work, an important goal

The restoration of a mill requires specialised knowledge, as it requires the theoretical and practical skills of several trades (carpenter, machinist, locksmith and carpenter). The work is not made any easier by the fact that it involves handling parts of great weight and dimensions. At the Fenyves Mill, the renovation of the drive structure, its conversion, the installation of the grinding machines and the design and construction of the two large water wheels presented the owner with a real challenge. Of course, he is not just doing this for heritage conservation. As Peter Tamás pointed out:

"We have not only renovated the building, we have brought it to life. The mills used to be community spaces, information centres. We bring this atmosphere back with our programmes: we regularly organise guided tours, oven bakes, carpentry workshops or day camps."

They were looking for authentic materials for the renovation of the listed building, as well as reliable quality and environmental awareness. "We were not only completely satisfied with the Cemix products," said the owner, "but we are also in contact with the manufacturer because we want to use Cemix products for future work."

 

 

Source : Link

Popular