Water management
PERI's innovative curved masonry technology was used in a project to improve water management in Debrecen and its surroundings
The first phase of the CIVAQUA programme is being implemented in Debrecen with HUF 15.748 billion in non-repayable EU and domestic funding under the Environment and Energy Efficiency Operational Programme (Kehop). The development is being implemented by a consortium of the National Water Authority and the Tiszántúli Water Authority, in cooperation with the Debrecen Municipal Government. The contractor is AQUA-GENERAL Kft. from Hajdúszoboszló.
The project will include, among other things, the renovation of the pumping station supplying water to the system from the Eastern Main Canal, the installation of a new pump and the construction of new yard pressure pipes, connecting them to the existing pipes.A total of almost 13 kilometres of pressure pipes with a diameter of 1 000 mm will be built.
The water from the Eastern Main Canal will flow through this new pressure pipe from the pumping station to the 3,000 cubic metre reinforced concrete equalising reservoir, which will also be built as part of the project. The reservoir will be constructed at the highest point in the area above Debrecen-Józsa, near the Bodai access road. The reservoir will be constructed by DAKI-ÉP Kft., using the formwork solutions of PERI.
To prevent water leakage, the number of voids during concreting had to be minimised
Dániel Pánczér Dániel Pánczér, the managing director of Daki-Ép gave information about the construction.
"To ensure optimal distribution of the large volume of water, the reservoir has a circular shape with walls 6.65 metres high, so its construction required an unusual formwork technology."
An important factor in the design of the circular reinforced concrete walls was the use of a formwork system that operates with few interconnections and allows the wall to be constructed with minimal gaps between the walls, thus ensuring the waterproofing that is a key requirement.
The PERI RUNDFLEX system proved to be the perfect choice in every respect, as starting from a radius of 1 metre, any radius can be precisely tracked using the adjustment screws (the internal radius of the tank is 12.70 metres), and by using RUNDFLEX straps, the number of connection points – and with it the quantity of PVC spacer tubes, cones and plugs – can be reduced by half. For a job of this size, this solution represented a significant cost saving.
In addition to the formwork panels, the component products were also supplied by PERI. The 6.55-metre-high wall was covered with two 3.60-metre panels placed on top of each other, which could also be used in later stages of concreting. The side formwork for the tank base plate was also provided by PERI's DUO wall formwork. The panels, together with the formwork shell and accessories, are all made of technopolymer material. Thanks to the low weight of the elements, installation was quick and easy.
The curved formwork combines efficiency with speed, and produces a homogeneous surface
"The key is to maximise water tightness and prevent water leakage. At the suggestion of PERI, OKTAGON cones were used for the wall penetrations on both sides, and after removing the prestressing steel, the expansion rubber sealing plugs were used. I didn't want to give water a chance, so we put an extra rubber ring on the prestressing steel penetrations, which when concreted will swell immediately under the effect of the cementitious water, thus completely blocking the water path. This gave us three times the protection against water in the wall penetrations", the managing director stressed.
The PERI RUNDFLEX is an excellent choice for curved artwork. Its use requires care to bend the formwork panels to the specified curve, but after concreting it leaves a beautiful continuous surface.
Despite the tight construction schedule, the RUNDFLEX formwork technique and schedule developed by PERI was able to keep the construction schedule to a maximum.
Source : Link
-
Bound track 2026. 10. 07.
Aurora beneath the Apennines – Another tunnel is being built on the Naples–Bari railway line
-
Road building 2026. 10. 13.
A consortium comprising STRABAG and Duna Aszfalt has been awarded the contract to build the North Macedonian motorway
-
What is being built? 2026. 10. 09.
One of Budapest’s oldest nurseries is being renovated whilst preserving its timber roof structure
-
Current at 2026. 10. 10.
„The focus will not be on Lean’s equipment, but on how we operate” – the ‘Lean in the Construction Industry’ conference in November
